Configuring Secure Socket Layer (SSL)
Common Errors in SSL Setup
9-18
Common Errors in SSL Setup
Error During
Generating host certificate on CLI
Enabling SSL on the CLI or WebAgent
Unable to Connect with SSL
Possible Cause
You have not generated a certificate
key. (Refer to "CLI commands used to
generate a Server Host Certificate" on
page 9-8.)
You have not generated a host
certificate. (Refer to "Generate a Self-
Signed Host Certificate with the
WebAgent" on page 9-12.)
You may be using a reserved TCP port.
(Refer to "Note on Port Number" on
page 9-17.)
You may not have SSL enabled (Refer
to "3. Enabling SSL on the Switch and
Anticipating SSL Browser Contact
Behavior" on page 9-15.)
Your browser may not support SSLv3
or TLSv1 or it may be disabled. (Refer
to the documentation provided for
your browser.)