Copying The Host Public Key; Removing The Ssh Client Key Pair - HP 3500yl Series Access Security Manual

Configuring Secure Shell (SSH)
SSH Client and Secure Sessions
8-36

Copying the Host Public Key

The following copy commands can be used to manage public keys in a known
hosts file. The public key can only be coped from the switch to a server or
other media, not to another switch.
Syntax: copy ssh-server-pub-key sftp [user <username> | <username@>]
<hostname | IPv4 | IPv6> <filename>
copy ssh-server-pub-key tftp <hostname | IPv4 | IPv6> <filename>
copy ssh-server-pub-key usb
copy ssh-server-pub-key xmodem
Copies the switch's SSH server public key to a server or other
media.
[user <username | username@>]: Optional; there must be
configured usernames for Operator and Manager.
If no username is specified, the client's current username
is used. There will be a prompt for a password if needed.
hostname: Specifies the hostname of the TFTP server.
IPv4: Specifies the TFTP server's IPv4 address.
IPv6: Specifies the TFTP server's IPv6 address.
<filename>: The name of the file to be copied.

Removing the SSH Client Key Pair

To remove the SSH client key pair file, use this command.
Syntax: crypto key zeroize ssh-client-key
Deletes the SSH client key pair.
You will be prompted for confirmation with the message:
Warning: The manager key pair will be deleted, continue
[y/n] ?