Named Source-Port Filters - HP 3500yl Series Access Security Manual

Switch software
Hide thumbs Also See for 3500yl Series:
Table of Contents

Advertisement

Workstation " X"
Figure 12-2. Example of a Filter Blocking Traffic only from Port 5 to Server "A"
Figure 12-3. The Filter for the Actions Shown in Figure 12-2

Named Source-Port Filters

You can specify named source-port filters that may be used on multiple ports
and port trunks. A port or port trunk can only have one source-port filter, but
by using this capability you can define a source-port filter once and apply it
to multiple ports and port trunks. This can make it easier to configure and
manage source-port filters on your switch. The commands to define,
configure, apply, and display the status of named source-port filters are
described below.
Traffic/Security Filters and Monitors
Switch
Port 5
Filter Types and Operation
Port 7
Server "A"
Port 8
Server "B"
Port 9
Server "C"
This list shows the filter created
to block (drop) traffic from
source port 5 (workstation "X") to
destination port 7 (server "A").
Notice that the filter allows
traffic to move from source port
5 to all other destination ports.
12-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents