HP 3500yl Series Access Security Manual page 478

IPv4 Access Control Lists (ACLs)
Configuring Standard ACLs
HP Switch(config)# access-list 17 permit host 10.10.10.104
HP Switch(config)# access-list 17 deny 10.10.10.1/24 log
HP Switch(config)# access-list 17 permit any
HP Switch(config)# show access-list 17
Access Control Lists
Name: 17
Type: Standard
Applied: No
SEQ Entry
------------------------------------------------------------------------------
10 Action: permit
IP : 10.10.10.104
20 Action: deny (log)
IP : 10.10.10.1
30 Action: permit
IP : 0.0.0.0
Figure 10-16. Standard, Numbered ACL with the Same ACEs as the Standard, Named ACL in Figure 10-14
10-58
Example of Creating and Viewing a Standard ACL. This example cre-
ates a standard, numbered ACL with the same ACE content as show in figure
10-14 on page 10-54.
Mask: 0.0.0.0
Mask: 0.0.0.255
Mask: 255.255.255.255
Note that each ACE is
automatically assigned a
sequence number.