Alarms - Siemens SIMATIC S7-1500 Function Manual

Websites

3.5 Alarms

3.5 Alarms
Alarms
To receive compact information on fault analysis, we recommend that you first read out the
content of the alarm buffer. This is the most effective method to get an overview of the
pending faults.
The browser displays the content of the alarm buffer on the "Alarms" website.
The alarms cannot be acknowledged on the Web server.
Admin
Start page
Identification
Diagnostic Buffer
Module information
Messages
Figure 3-11
Requirements
The message texts were configured in the user-specific languages. For information about
configuring message texts refer to STEP 7 and to the Service&Support pages
(http://www.siemens.com/automation/service&support).
①
"Filter"
You can filter the table based on specific criteria.
1. Select a parameter from the drop-down list.
2. Enter the value of the selected parameter.
3. Click "Filter".
To deactivate the filter settings, click "Filter" again.
Effects
● The filter settings are also retained when you update a page.
● Filter settings have no effect on the print-out. A printout always contains the entire
30
CPU 1516/SIMATIC S7 CPU 1516 PN/DP
Messages
Log out
MessageNr.
1
2
3
4
5
6
7
Details on message number: 93
Short name: SCALANCE-X204IRT Order number: 6GK5204-0BA00-2BA3
Alarms
content of the message buffer.
Date Time Message text
13.11.2012 08:23:24.644 PN device 5 on PN system...
13.11.2012 08:23:24.796 PN device 4 on PN system...
13.11.2012 08:23:24.948 PB slave 3 on PB system...
13.11.2012 08:23:25.099 PB slave 1 on PB system...
13.11.2012 08:23:25.251 PN device 3 on PN system...
13.11.2012 08:23:25.402 PN device 2 on PN system...
13.11.2012 08:23:25.553 PN device 1 on PN system...
16:43:22 15.11.2012
Message number
Status
incoming
incoming
incoming
incoming
incoming
incoming
incoming
Function Manual, 01/2013, A5E03484625-01
English
Filter
Off
Acknowledgement
not acknowledged
not acknowledged
not acknowledged
not acknowledged
not acknowledged
not acknowledged
not acknowledged
Web server