Usb Configuration; Csmconfiguration - DFI CS331-C246 User Manual

CS331-C246/Q370
► Advanced

USB Configuration

This section is used to configure the USB settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB Configuration
Legacy USB Support [Enabled]
[Enabled]
XHCI Hand-off
[Enabled]
USB Mass Storage Driver Support
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Legacy USB Support
Enabled Enable Legacy USB support.
Disabled Keep USB devices available only for EFI applications.
Auto Disable Legacy support if no USB devices are connected.
XHCI Hand-off
Enable or disable XHCI Hand-off.
USB Mass Storage Driver Support
Enable or disable USB Mass Storage Driver Support.
Chapter 3 - BIOS
► Advanced
CSM Configuration
This section is used to configure the CSM settings.
Enables Legacy USB
support. AUTO option
disables legacy support if
no USB devices are con-
nected. DISABLE option
will keep USB devices
available only for EFI
applications.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
CSM Support
This section is used to enable or disable CSM Support. When CSM Support is set to enabled,
several options will appear for configuration.
42
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Compatibility Support Module Configuration
CSM Support [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Compatibility Support Module Configuration
CSM Support [Enabled]
Boot option filter [UEFI only]
Option ROM execution
Network [Do not launch]
Storage [UEFI]
Video [UEFI]
Other PCI devices [UEFI]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
www.dfi.com
Enable/Disable CSM
Support.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Enable/Disable CSM
Support.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit