Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DFI CS331-C246
Summary of Contents for DFI CS331-C246
- Page 1 CS331-C246/Q370 MicroATX Industrial Motherboard User’s Manual A52410940...
-
Page 2: Copyright
CS331-C246/Q370 www.dfi.com Copyright FCC and DOC Statement on Class B This publication contains information that is protected by copyright. No part of it may be re- This equipment has been tested and found to comply with the limits for a Class B digital produced in any form or by any means or used to make any transformation/adaptation without device, pursuant to Part 15 of the FCC rules. -
Page 3: Table Of Contents
CS331-C246/Q370 www.dfi.com Table of Contents SATA (Serial ATA) Connectors ........24 Digital I/O Connector ..........24 Cooling Fan Connectors..........25 Power Connectors ............25 Copyright ................2 Chassis Intrusion Connector ........26 Front Panel Connector ..........26 Trademarks .................2 LAN LED Connector ..........27 S/PDIF Connector ............27 FCC and DOC Statement on Class B ........2... -
Page 4: Warranty
CS331-C246/Q370 www.dfi.com Warranty Static Electricity Precautions 1. Warranty does not cover damages or failures that arised from misuse of the product, in- It is quite easy to inadvertently damage your PC, system board, components or devices even ability to use the product, unauthorized replacement or alteration of components and prod- before installing them in your system unit. -
Page 5: About The Package
The package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. • One CS331-C246/Q370 motherboard • One COM port cable (With Bracket, Length: 300mm, 2 x COM ports) •... -
Page 6: Chapter 1 - Introduction
Core /Pentium /Celeron Processors, LGA 1151 1 x DP++ Socket, TDP up to 95W Audio 1 x Line-out Chipset CS331-C246: Intel ® C246 Chipset 1 x Line-in (colay, opt., MOQ required) CS331-Q370: Intel ® Q370 Chipset 1 x Mic-in Memory... -
Page 7: Features
Chapter 1 - Introduction CS331-C246/Q370 www.dfi.com ► Features Wake-On-LAN Watchdog Timer This feature allows the network to remotely wake up a Soft Power Down (Soft-Off) PC. It is supported via the onboard LAN port or via a PCI LAN card that uses the PCI PME (Power Man- The Watchdog Timer function allows your application to regularly “clear”... - Page 8 Chapter 1 - Introduction CS331-C246/Q370 www.dfi.com Power Failure Recovery When power returns after an AC power failure, you may choose to either power-on the system manually or let the system power-on automatically. The system board supports the new USB 3.1 Gen 2. It is capable of running at a maximum transmission speed of up to 10 Gbit/s (1.2 GB/s) and is faster than USB 3.1 Gen 1 (5 Gbit/s,...
-
Page 9: Chapter 2 - Hardware Installation
PCIe 4 (PCIe x4) RS232/Power ALC888S (JP17) Select (JP7) System Fan 2 S/PDIF System SATA 6 SATA 5 SATA 3 COM 3 USB 9-10 COM 2 COM 4 USB 7-8 Fan 3 (CS331-C246 only) or Optional SATA 3.0 Vertical USB 9 USB 2.0... -
Page 10: Installing The Dimm Module
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► System Memory Installing the DIMM Module The system board supports the following memory interface. Single Channel (SC) Data will be accessed in chunks of 64 bits from the memory channels. Before installing the memory module, please make sure that the following safety cautions are well-attended. -
Page 11: Cpu
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► System Memory ► Installing the DIMM Module ► CPU Please follow the steps below to install the memory card into the socket. Step 1: The system board is equipped with a surface mount LGA 1151 socket. This socket is exclu- Press the eject tabs at both ends of the socket outward and downward to release them from the sively designed for installing a LGA 1151 packaged Intel CPU. -
Page 12: Installing The Cpu
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► CPU ► CPU ► Installing the CPU Installing the CPU Load lever 5. Lift the load lever and the load 1. Make sure the PC and all other peripheral devices connected to it have been powered plate all the way up as shown in down. - Page 13 Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► CPU ► Installing the CPU Load lever 7-2. Two keys on the sock- 8. Close the load plate Alignment key et and notches on then push the load le- the CPU also facilitate ver down.
-
Page 14: Installing The Fan And Heat Sink
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► CPU Installing the Fan and Heat Sink The CPU must be kept cool by using a CPU fan with heat sink. Without sufficient air circula- 4. Screw tight two of tion across the CPU and heat sink, the CPU will overheat damaging both the CPU and system the spring screws at board. -
Page 15: Jumper Settings
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Jumper Settings ► Jumper Settings Mini PCIe/mSATA Signal Select Clear CMOS 1-2 On: Normal (default) 1-2 On: Mini PCIe (default) 2-3 On: Clear CMOS 2-3 On: mSATA If any anomaly of the followings is encountered —... -
Page 16: Com1/Com2 Rs232/422/485 Select
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Jumper Settings COM1/COM2 RS232/422/485 Select ▼ JP3 (COM1)/JP10 (COM2) 2 4 6 2 4 6 2 4 6 JP1 (COM 1) (COM 1) 1 3 5 1 3 5 1 3 5... -
Page 17: Com1/Com2 Rs232/Power Select
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Jumper Settings COM1/COM2 RS232 Power Select ▼ JP4 (COM 1) 2 4 6 2 4 6 JP4 (COM 1) 1 3 5 1 3 5 COM 1 1-3 (RI-), 2-4 (DCD-) On:... -
Page 18: Ps/2 Power Select
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Jumper Settings ► Jumper Settings PS/2 Power Select USB Power Select 2-3 On: +5V 1-2 On: 1-2 On: 2-3 On: +5VDU (default) +5VDU (default) USB 2.0 5-6 (JP21) 1-2 On: JP20 +5VDU (default) USB 3.1 1-2... -
Page 19: Rear Panel I/O Ports
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Rear Panel I/O Ports ► Rear Panel I/O Ports PS/2 Keyboard/Mouse Port Overview PS/2 Keyboard/Mouse DVI-I COM 1 (DVI-D signal) LAN 1 LAN 2 PS/2 KB/MS Line-out USB 2.0 Mic-in USB 3.1 USB 3.1... -
Page 20: Com (Serial) Ports
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Rear Panel I/O Ports COM (Serial) Ports COM 1 ▼ COM 3/4 Pin Assignment Assignment COM 1: RS232/422/485 DCD- SIN- COM 2 DTR- COM 2: COM 3 COM 4 RS232/422/485 DSR- RTS-... -
Page 21: Graphics Interfaces
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Rear Panel I/O Ports Graphics Interfaces The display ports consist of the following: HDMI Port The HDMI port which carries both digital audio and video signals is used to connect a LCD •... -
Page 22: Rj45 Lan Ports
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Rear Panel I/O Ports ► Rear Panel I/O Ports RJ45 LAN Ports Audio Line-out LAN 1 LAN 2 LAN 1 Mic-in LAN 2 Rear Audio Mic2-L Front Mic2-R Audio Mic2-JD Line2-R Line2-L... -
Page 23: Usb Ports
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Rear Panel I/O Ports USB Ports Driver Installation You may need to install the proper drivers in your system operation to use the USB device. Refer to your operating system’s manual or documentation for more information. -
Page 24: I/O Connectors
• 5 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s (CS331-Q370) DIO7 +12V • 6 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s (CS331-C246) • Integrated Advanced Host Controller Interface (AHCI) controller DIO6 •... -
Page 25: Cooling Fan Connectors
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Internal I/O Ports ► Internal I/O Ports Cooling Fan Connectors Power Connectors Ground Power +12V Power Sense System Fan 1 CPU Fan +12V Power 12 24 +3.3V +12V +12V Speed +5VSB Control... -
Page 26: Chassis Intrusion Connector
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Internal I/O Ports ► Internal I/O Ports Chassis Intrusion Connector Front Panel Connector ▼ Front Panel Connector PWR-LED HD-LED RESET ATX-SW 11 12 Chassis Intrusion Signal HDD-LED - Hard Disk Drive LED Ground Lighting of the LED indicates that the hard drive is being accessed. -
Page 27: Lan Led Connector
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Internal I/O Ports ► Internal I/O Ports LAN LED Connector S/PDIF Connector ▼ LAN LED Connector SPDIF out SPDIF in S/PDIF The LAN LED connector is used to detect the connection state of RJ45 LAN ports when the The S/PDIF connector is used to connect an external S/PDIF port. -
Page 28: Smbus Connector
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Internal I/O Ports ► Internal I/O Ports SMBus Connector Standby Power LED Standby Power LED SMBus The SMBus (System Management Bus) connector is used to connect SMBus devices. It is a This LED will lit red when the system is in the standby mode. It indicates that there is power multiple device bus that allows multiple chips to connect to the same bus and enable each on the system board. -
Page 29: Lpc Connector
LPC Connector External COM Port Module The external COM port modules — EXT-RS232 and EXT-RS485 — are designed by DFI’s pro- prietary technology, and support four additional COM ports per module. The EXT-RS232/RS485 card is connected to the motherboard via the LPC connector and secured by a standoff as il- lustrated below. -
Page 30: Expansion Slots
Chapter 2 - Hardware Installation CS331-C246/Q370 www.dfi.com ► Internal I/O Ports ► Internal I/O Ports Expansion Slots Battery M.2 M Key PCI Express x16 (x8 or x16 Signal) PCI Express x16 (x8 or x16 Signal) PCI Express x4 Battery PCI Express x4 Mini PCIe (PCIe/mSATA/USB2.0) -
Page 31: Chapter 3 - Bios Setup
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com Chapter 3 - BIOS Setup ► Overview Legends The BIOS is a program that takes care of the basic level of communication between the CPU and peripherals. It contains codes for various advanced features found in this system board. -
Page 32: Main
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Main The Main menu is the first screen that you will see when you enter the BIOS Setup Utility. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. -
Page 33: Advanced
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced RC ACPI Settings This section is used to configure the system ACPI parameters. The Advanced menu allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. -
Page 34: Cpu Configuration
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► RC ACPI Settings ► Advanced CPU Configuration This section is used to configure the CPU. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. -
Page 35: Power & Performance
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► Advanced Power & Performance PCH-FW Configuration This section is used to configure the power & performance options. This section configures the parameters of Management Engine Technology. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. - Page 36 Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► PCH-FW Configuration Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Advanced Advanced ME State [Enabled] Configure Intel(R) Active Secure Erase mode...
- Page 37 Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► PCH-FW Configuration Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Advanced Advanced ME State [Enabled] Configure Management Hide Unconfigure ME Confirmation...
-
Page 38: Trusted Computing
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► Advanced Trusted Computing NCT6116D Super IO Configuration This section configures settings relevant to Trusted Computing innovations. This section is used to configure the I/O functions supported by the onboard Super I/O chip. -
Page 39: Nct6116D Hw Monitor
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► NCT6116D Super IO Configuration ► Advanced NCT6116D HW Monitor This section displays the hardware health monitor and also configures smart fan and case Serial Port 1 to 4 Configuration open functions. Multiple aspects of the real-time physical status of the board are displayed. - Page 40 Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► NCT6116D HW Monitor Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Advanced Advanced Boundary 4 Speed Count 1/2/3/4, Smart Fan Function...
-
Page 41: Serial Port Console Redirection
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced Serial Port Console Redirection This section configures settings relevant to serial port console redirection. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. -
Page 42: Usb Configuration
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► Advanced USB Configuration CSM Configuration This section is used to configure the USB settings. This section is used to configure the CSM settings. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. -
Page 43: Usb Power Control
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced ► CSM Configuration ► Advanced USB Power Control Boot option filter USB 3.0 ports (USB 1-6) and USB 2.0 ports (USB 5-10) support system wakeup from S3 or S4 state via keyboard and mouse signal input. To enable S3/S4 wakeup, select 5V_Dual. To dis- This field controls Legacy/UEFI ROMs priority. -
Page 44: Network Stack Configuration
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Advanced Network Stack Configuration ► Chipset This section is used to configure the Network Stack settings. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Network Stack Main Advanced Chipset Security Boot Save &... - Page 45 Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Chipset ► Chipset PEG Port Configuration PCH-IO Configuration This section configures the PCIe Graphics (PEG) function available for PCIE1 and PCIE2. This section illustrates the PCH parameters. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
-
Page 46: Pci Express Configuration
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Chipset ► PCH-IO Configuration ► PCI Express Configuration LAN2(I211) Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Chipset I211 Enable or disable the port. PCI Express Configuration PCI Express Root Port Settings. - Page 47 Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Chipset ► PCH-IO Configuration ► Chipset ► PCH-IO Configuration ► SATA And RST Configuration Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Note: Chipset Number of SATA ports differ according to the chipset that is installed on the...
-
Page 48: Security
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Security Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Security Password Description Set Administrator... -
Page 49: Boot
Chapter 3 - BIOS CS331-C246/Q370 www.dfi.com ► Boot ► Save & Exit Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security Save & Exit Boot... -
Page 50: Updating The Bios
You may refer to the how-to video “How the safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system board and to update AMI BIOS in UEFI mode on DFI products?” at https://www.dfi.com/Knowledge/ used on another system board of the same model. -
Page 51: Chapter 4 - Raid
Chapter 4 - RAID CS331-C246/Q370 www.dfi.com Chapter 4 - RAID ► Settings The system board allows configuring RAID on Serial ATA drives. It supports RAID 0, RAID 1, To enable the RAID function, the steps below are required and elaborated in following sec- RAID 5 and RAID 10. - Page 52 Chapter 4 - RAID CS331-C246/Q370 www.dfi.com Step 3: Create a RAID Volume Step 4: Install the Intel Rapid Storage Technology Utility 1. Go to the “Advanced” menu of the AMI BIOS and select “Intel(R) Rapid Storage Tech- The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows nology”.
-
Page 53: Chapter 5 - Intel Amt Settings
Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com Chapter 5 - Intel AMT Settings Enable Intel AMT in the AMI BIOS ® ► Overview 1. Power-on the system then press <Del> to enter the main menu of the AMI BIOS. - Page 54 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com Configure Intel® AMT in the Intel® Management Engine BIOS 4. In the Save & Exit menu, select Save Changes and Reset and then press <Enter>. A dialog box will appear. Select Yes and press Enter to reset the system after saving all Extension (MEBX) changes made.
- Page 55 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com 2. Select MEBx Login and press Enter. You will be prompted for a password. The default 4. You will be asked to verify the new password. Enter the same new password in the space password is “admin”.
- Page 56 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com 6. If you want to change ME password, select Change ME Password then press Enter. 8. You will be asked to verify the new password. Enter the same new password in the space Enter the current password in the space provided under Intel(R) ME Password then press provided under Verify Password then press Enter.
- Page 57 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com Press Esc until you return to the Main Menu. Select Intel(R) AMT then press Enter. In the Intel(R) AMT Configuration menu, select Manageability Feature Selection Select Enabled or Disabled then press Enter.
- Page 58 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com Select SOL then press Enter. Select Enabled or Disabled then press Enter. Select KVM Feature Selection then press Enter. Select Enabled or Disabled then press Enter. Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433 Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433...
- Page 59 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com In the User Consent menu, select User Opt-in then press Enter. Select NONE or KVM Press Esc until you return to the Intel(R) AMT Configuration menu. Select Password or ALL then press Enter.
- Page 60 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com In the Intel(R) ME Network Setup menu, select Intel(R) ME Network Name Set- Select Domain Name then press Enter. Enter the computer’s domain name then press tings then press Enter. Enter. Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433 Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433...
- Page 61 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com Select TTL then press Enter. Enter value then press Enter. Select Dynamic DNS Update then press Enter. Select Enabled or Disabled then press Enter. If Dynamic DNS Update is set to Enabled, Periodic Update Interval and TTL fields will show up.
- Page 62 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com In the Wired LAN IPV4 Configuration menu, select DHCP Mode then press Enter. Select Subnet Mask Address then press Enter. Enter address then press Enter. Select Enabled or Disabled then press Enter. If set to Disabled, IPV4 Address, Subnet Mask Address, Default Gateway Address, Preferred DNS Address and Alternate DNS Address will show up.
- Page 63 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com Select Preferred DNS Address then press Enter. Enter address then press Enter. Press Esc until you return to the Intel(R) AMT Configuration menu. If you want to activate the current network settings and open the ME network inferface, select Activate Network Access, press Enter, then press Y.
- Page 64 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com In the Intel(R) AMT Configuration menu, select Remote Setup And Configuration In the Intel(R) Remote Setup And Configuration menu, select Provisioning Re- then press Enter. cord then press Enter. Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433 Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433...
- Page 65 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com In the Intel(R) Remote Setup And Configuration menu, select Provisioning Press Esc until you return to the Intel(R) Remote Setup And Configuration menu. Server FQDN then press Enter. Enter the FQDN then press Enter.
- Page 66 Chapter 5 - Intel AMT Settings CS331-C246/Q370 www.dfi.com In the Intel(R) Remote Configuration menu, select Manage Hashes then press In the Intel(R) AMT Power Control menu, select Idle Timeout then press Enter. Enter. Select the hash name then press Insert to enter custom hash certificate name, Enter the timeout value and press Enter.
-
Page 67: Chapter 6 - Supported Software
Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com Chapter 6 - Supported Software Click “More >>” on the lower right to view go to the next page of the auto-run menu, and click “<< Previous” to return to the previous menu. -
Page 68: Intel Chipset Software Installation Utility
Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com ► Intel Chipset Software Installation Utility 3. Go through the readme docu- ment for more installation tips then click “Install”. The Intel Chipset Software Installation Utility is used for updating Windows INF files so that ®... - Page 69 Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com ► Intel HD Graphics Drivers 3. Go through the readme docu- ment for system requirements and installation tips then click “Next”. 1. Setup is now ready to in- stall the graphics driver. Click “Next”.
- Page 70 Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com ► Realtek Audio Drivers ► Intel LAN Drivers 1. Setup is ready to install the 1. Setup is ready to install the driver. Click “Next”. driver. Click “Next”. 2. Click “Yes, I want to restart my 2.
- Page 71 Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com ► Intel ME Drivers 4. Click “Install” to begin the in- stallation. 1. Setup is ready to install the driver. Click “Next”. 5. The step displays the installing status in the progress. 2. Read the license agreement then tick “I accept the terms in...
- Page 72 Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com ► Intel Serial IO Drivers 3. Click “Next” to install to the default folder, or click “Change” to choose another destination folder. 1. Setup is ready to install the driver. Click “Next”. 4. Please wait while the product is being installed.
- Page 73 Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com 3. Go through the readme docu- 5. Setup is now installing the ment for system requirements driver. and installation tips then click “Next”. 4. Setup is ready to install the 6. Click “Yes, I want to restart driver.
- Page 74 Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com ► Adobe Acrobat Reader 9.3 1. Click “Next” to install or click 3. Setup is now installing the “Change Destination Folder” to driver. select another folder. 2. Click “Install” to begin installa- 4. Click “Finish” to exit installa- tion.
-
Page 75: Intel Rapid Storage Technology
Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com ► Intel Rapid Storage Technology 3. Go through the readme document to view system requirements and installation information then click The Intel Rapid Storage Technology is a utility that allows you to monitor the current status “Next”. - Page 76 Chapter 6 - Supported Software CS331-C246/Q370 www.dfi.com 6. Click “Yes, I want to restart this computer now” to com- plete the installation and then click “Finish”.