DFI CS331-C246 User Manual page 36

CS331-C246/Q370
► Advanced ► PCH-FW Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
ME State [Enabled]
Manageability Features State [Enabled]
AMT BIOS Features [Enabled]
AMT Configuration

ME Unconfig on RTC Clear [Enabled]
Firmware Update Configuration

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB Provisioning of AMT [Disabled]
Secure Erase Configuration

OEM Flags Settings

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
USB Provisioning of AMT
Enable or disable AMT USB Provisioning.
Secure Erase Configuration
This section is used to configure Secure Erase.
Chapter 3 - BIOS
Configure Intel(R) Active
Management Technology
Parameters
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Secure Erase Mode
Enable/Disable of AMT
Select Secure Erase module behavior: Simulated or Real.
USB Provisioning.
Force Secure Erase
Enable or disable Force Secure Erase on next boot.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
36
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Secure Erase mode [Simulated]
Force Secure Erase [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB Provisioning of AMT [Disabled]
Secure Erase Configuration

OEM Flags Settings

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
www.dfi.com
Change Secure Erase
module behavior:
Simulated: Performs SE
flow without erasing SSD
Real: Erase SSD.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Configure OEM Flags
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit