Table of Contents
Advertisement
CS331-C246/Q370
► CPU
► Installing the CPU
7-2. Two keys on the sock-
Alignment key
et and notches on
the CPU also facilitate
alignment.
Alignment key
Important:
The CPU will fit in only one orientation and can easily be seated without exerting
any force.
7-3.The CPU's notch will
fit into the socket's
alignment key when
it's seated in the cor-
rect orientation.
Chapter 2 - Hardware Installation
8. Close the load plate
9. Press down the load
13
then push the load le-
ver down.
While closing the load
plate, make sure the
front edge of the load
plate slides under the
retention knob.
lever and hook it un-
der the retention tab.
www.dfi.com
Load lever
Retention knob
Advertisement
Table of Contents
Need help?
Do you have a question about the CS331-C246 and is the answer not in the manual?