Trusted Computing; Nct6116D Super Io Configuration - DFI CS331-C246 User Manual

CS331-C246/Q370
► Advanced

Trusted Computing

This section configures settings relevant to Trusted Computing innovations.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Configuration
Security Device Support
[Enable]
NO Security Device Found
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Security Device Support
This field is used to enable or disable BIOS support for the security device. O.S will not show
the security device. TCG EFI protocol and INT1A interface will not be available.
Chapter 3 - BIOS
► Advanced

NCT6116D Super IO Configuration

This section is used to configure the I/O functions supported by the onboard Super I/O chip.
Enables or Disables
BIOS support for secu-
rity device. O.S will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
WatchDog Timer Unit
Select WatchDog Timer Unit: Second or Minute.
SuperIO WatchDog Timer
Set SuperIO WatchDog Timer Timeout value. The range is from 0 (disabled) to 255.
Serial Port 1 Configuration to Serial Port 6 Configuration
Set the parameters of serial port 1 (COM 1) to serial port 4 (COM 4).
38
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
NCT6116D Super IO Configuration
Super IO Chip NCT6106D
[Second]
WatchDog Timer Unit
0
SuperIO WatchDog Timer
Serial Port 1 Configuration

Serial Port 2 Configuration

Serial Port 3 Configuration

Serial Port 4 Configuration

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
www.dfi.com
WatchDog Timer Unit
Selection
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit