Key
SPAN
ALT
DISP
RESET
TOTAL
Clear Entry
CLEAR
Toggle between VIEW and EDIT
ENTER
or use to enter parameter values
RUN Mode
To operate the SF 500 in RUN mode, program the unit with the base operating
parameters.
If you enter RUN mode before satisfying the program requirements, the PROGRAM
routine moves to the first missing item.
PROGRAM Mode
Use PROGRAM mode to change parameter values, and the way the unit operates.
•
When the unit is initially powered, it starts in PROGRAM mode
•
Ensure that the SW1 is set to the right (see Layout diagram on page 7)
•
Program parameters define the calibration and operation of the SF 500
•
By entering PROGRAM mode, the user can view the parameter values or EDIT them
to suit the application
•
When in PROGRAM Mode the unit identifies the name of the parameter, the
description, and the options or instructions for making a valid entry
PROGRAM Mode Display
VIEW
P001 Language
1-Eng
EDIT
P001 Language
1-Eng
Page 20
PROGRAM Mode
Milltronics SF 500 – INSTRUCTION MANUAL
RUN Mode
Scrolls through RUN Displays
Resets Totalizer 1
V
1
E
1
7ML19985CN01