Updates - HPC CodeMax Manual

6. Updates

Updates to the CodeMax
CD supplied by HPC, Inc. Connect the Serial Cable (included with
CodeMax ) to the correct Com Port on your PC and the RS422
®
port on the back of the CodeMax
with the CD to update your CodeMax
open any part of the CodeMax
Program name: Update.exe
To start, double click the desktop shortcut CodeMax
Update or, in My Computer, open your C: drive, open the Program Files folder, open the HPCSoft
Update folder, double click Update.exe (application).
CodeMax
®
Make sure your serial cable is connected to the back of the CodeMax
To update your CodeMax
Status will display progress: Waiting for Load Command, Waiting for STX, Sending Data (54 bytes, , 2, etc.), Waiting
for ACK, Send Complete. During the update process, CodeMax
CodeMax will beep when the update is completed.
®
If the new update information does not appear in CodeMax
files.
If CodeMax does not beep on completion of the update process, or if the update process is interrupted, or if the CodeMax
®
screen remains dark after Send Complete, use the following correction procedure:
. Turn off your CodeMax
instructed below.
2. On your computer, open My Computer
. Open the C: drive.
4. Open the Program Files folder.
5. Open the HPCSoft folder.
6. Open the CodeMax
7. LEAVE THE CodeMax
8. In HPC CodeMax
®
Program.
9. Click Start Update
0. When Status reads "Waiting for STX",
ON CodeMax .
®
. CodeMax operating instructions will
®
download.
If your CodeMax fails to start after this procedure, contact HPC
®
Key Machine Services.
60
are now performed using your PC and a
®
. Follow the directions that come
®
®
to perform updates.
®
, click on the Com Port to which CodeMax
®
, leave off until
®
Update folder
®
TURNED OFF!
®
Update Program, click
. It is no longer necessary to
Update, or click Start, Program files, HPCSoft
®
.
®
is connected and click Start Update.
®
screen will display "Starting Upgrade **Please Wait**".
®
, repeat the update process. Be sure you are using the latest
®
turn
CodeMax
®
and CodeMax
™ ®
folder, open the
™
®