Emergency Button - HPC CodeMax Manual

1.5 The Emergency Stop Button
The CodeMax
®
Pushing the emergency stop button at any time will immediately freeze the operation in
which the machine is engaged. For example, if you started the cutting process and realized
you had the wrong cutter or key blank, pushing the emergency stop button would instantly
turn off the cutter motor and stop the pivot arm from traveling.
To reset the CodeMax
machine freezes, push the emergency
stop button until it pops out, and
the machine will return to its Home
Position. Make the necessary
adjustments (e.g. put the shoulder
gauge down, or install the correct
cutter or key blank), and start the key
cutting process again.
*Note: When the emergency stop button is pushed, the CodeMax
if the bittings were entered directly on the CodeMax
If you have any questions, please call the HPC Service Dept. -800-2-295.
0
has an emergency stop button installed.
, after the
®
will clear the bittings entered,
®
keypad.
®
CodeMax
®