After The Key Has Been Cut - HPC CodeMax Manual

4.1.3 After The Key Has Been Cut

After the key has been cut you will have four options:
1) Press START to cut an additional key to the same bitting.
2) Press NEW CODE or CLEAR to enter a new bitting, using the same DSD.
Press CLEAR twice to enter a different DSD number.
3)
4) Press ENTER to autoload the next DSD number associated with a "Double-Sided
Different" key. If no autoload specifications are present, the CodeMax
the main screen.
5) Press CLEAR until you reach the main screen.
NOTE: At all screens you may press CLEAR to return to the previous screen.
CodeMax
®
will return to
®
35