Manual Calibration; Space Calibration - HPC CodeMax Manual

5.2 Manual Calibration

The Electronic Adjustment Function is suitable for making minor adjustments.
Manual Calibration will be required if the carriage is replaced or is accidentally moved
significantly out of position.
I. Space Calibration
No readjustment of space is required when changing from one depth and spacing
specification to another. The information sent by the DSD number or computer positions
the correct lateral alignment when using factory cutters. The need to readjust the space is
rare and should be attempted only after the more common causes for miscut keys have been
eliminated.
Remember, when originating a key by code, quite often, code numbers are misread. Locks
can sometimes be coded incorrectly when they are new, and code books occasionally have
typographical errors. All this distracts from successful cutting of keys by code.
You may proceed after eliminating the above mentioned causes for miscut keys and
checking for correct depth calibration.
50
CodeMax
®