Additional Notes - HPC CodeMax Manual

4.1.4 Additional Notes

1) The CodeMax
from tip to bow. However, all bittings must be
tip order.
2) If the original manufacturer (such as Kwikset) widens some or all of the cuts, the
CodeMax
®
3) When cutting double-sided keys where there is a shoulder on only one side of the key,
or where the shoulders are not symmetrical (such as some VW keys), always cut the
shoulder gauged side of the key first, then press ENTER to cut the plain side.
4) Because most double-sided keys are gauged by placing an uncut blade against the
back of the jaw, the recommended cutting
®
CodeMax
key as the original.
5) At all screens you may press CLEAR to return to the previous screen.
36
always cuts shoulder-gauged keys from bow to tip, and tip-gauge keys
®
will automatically do the same.
and then cut both sides of another blank in a duplicator, using the code-cut
entered into the CodeMax
procedure is to cut the first side on the
CodeMax
®
® in bow to