Rudder Pedals Installation - Cessna T182 Series Service Manual

MODEL 182 & T182 SERIES SERVICE MANUAL
NOTE
*20
Brake links (5), bellcranks (17). brake torque 2 1
tubes (14) and attaching parts are not required
unless dual controls ARE installed. When dual
controls ARE NOT installed, hubs (18) are at-
tached to each end of forward and aft rudder bars.
SINGLE CONTROLS
HUB
CLEARANCE HUB
CLEARANCE HOLE AFT
1. Anti-Rattle Spring
2. Pedal
3. Shaft
4. Spacer
5. Brake Link
6. Right Forward Cable
7. Left Forward Cable
15
8. Rudder Bar Arm (For wiffletree
-
push-pull rod attachment)
13
9. Aft Rudder Bar
10. Bearing Block
11. Rudder Bar Arm (For wiffletree
push-pull rod attachment)
*THRU 18268101
12. Forward Rudder Bar
13. Bracket
18268102
14. Brake Torque Tube
15. Master Cylinder
16. Bearing
17. Bellcrank
4
18. Single Controls Hub
Detail
B
19. Rudder Pedal Extension
20. Pedal Shaft
Figure 10-2. Rudder Pedals Installation (Sheet 1 of 2)
10-4