Flap Installation - Cessna T182 Series Service Manual

Hide thumbs Also See for T182 Series:

Table of Contents

MODEL 182 & T182 SERIES SERVICE MANUAL

Bushings (4), rollers (3) and spacers (9) are

first positioned through slots in flap tracks,

then are secured to the flap roller supports (2)

with attaching bolts, washers and nuts. Nylon

plug buttons (11) prevent wing flap from chafing

wing trailing edge.

Position spacers (9) and direction of bolts (5) as

required to provide adequate flap clearance at

wing root, flap well skin and aileron. Some

eral movement of flap is inherant due to the width

of rollers. This movement should be considered

when positioning spacers and direction of bolts.

2. Flap Support

Beginning with Serial 18268475, cover plates (1)

3. Roller Assembly

are attached to flaps with recessed head screws.

6. Push-Pull Rod

Flap Bracket

10. Plug Button

Nylon Plug Button

Flap Installation

Troubleshooting