Сables And Pulleys; Rudder Installation - Cessna T182 Series Service Manual

MODEL 182 & T182 SERIES SERVICE MANUAL
A
Detail A
Detail B
1. Bolt
2. Upper Hinge
3. Washer
4. Nut
5. Center Hinge
6. Balance Weight
7. Rudder
8. Lower Hinge
9. Bellcrank
10. Bushing
C
/
10
DetailD
DetailD
THRU 18267182
BEGINNING WITH 18267183 Detail C
AND F18200129
AND F18200130
Figure 10-3. Rudder Installation
d. Disconnect cables (index 5 and 7, figure 10-1)
10-9. CABLES AND PULLEYS. (See
from rudder bellcrank.
figure 10-1.)
e. With rudder supported, remove all hinge bolts,
and using care, lift rudder free of vertical fin.
10-10. REMOVAL AND INSTALLATION.
f. Reverse the preceding steps for reinstallation.
a. Remove seats, upholstery and access plates as
Rig system in accordance with paragraph 10-11,
necessary.
safety turnbuckles and reinstall all items removed
b. Relieve cable tension at turnbuckles (10) and dis-
for access.
connect cables.
c. Disconnect cables (index 6 and 7, figure 10-2)
10-8. REPAIR. Repair may be accomplished as
from rudder bar arms.
outlined in Section 18.
d. Remove cable guards and pulleys as necessary
to work cables free of aircraft.
10-6