Recommended Safe Distances Between Portable And Mobile Hf Telecommunications Equipment And The Electromatic - KaVo ELECTROmatic M Instructions For Use Manual

12 Information on electromagnetic compatibility | 12.4 Recommended safe distances between portable and mobile
Rated power of the
transmitter in W
0.01
0.1
1
10
100
Comment 2: These guidelines may not be applicable in every case. The spread
of electromagnetic waves is absorbed and reflected by buildings, objects and
people.
12.4 Recommended safe distances between portable
and mobile HF telecommunications equipment and the
ELECTROmatic
The ELECTROmatic is intended for use in an electromagnetic environment, in
which the HF interference parameters are controlled. Doing so, the customer or
user of the ELECTROmatic can help prevent electromagnetic interference by
maintaining the minimum clearance between portable and mobile HF telecom-
munication devices (transmitters) and the ELECTROmatic depending on the
output of the communication device as indicated below.
The table shows the necessary safe distance depending on the transmission fre-
quency in m:
150 kHz to 80 MHz
d=1.17
P
0.12
0.37
1.17
3.70
11.70
For transmitters whose maximum rated power is not in the above table, the
recommended safe distance d in meters (m) can be calculated using the equa-
tion for the respective gap, where P is the maximum rated power of the trans-
mitter in Watts (W) according to the manufacturer's information.
Comment 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Comment 2: These guidelines may not be applicable in every case. The spread
of electromagnetic waves is absorbed and reflected by buildings, objects and
people.
Instructions for use ELECTROmatic M/C and PM/PC
HF telecommunications equipment and the ELECTROmatic
80 MHz to 800 MHz
d=0.35
P
0.04
0.11
0.35
1.11
3.5
77 / 80
800 MHz to 2.5 GHz
d=0.70
P
0.07
0.22
0.70
2.21
7.0