8 Auxiliary Equipment; Terms And Conditions Of Warranty - KaVo INTRAcompact contra-angle 0768 LHC Instructions For Use Manual

Setup methods according to DIN EN ISO 17664
Auxiliary equipment

Terms and conditions of warranty

Terms and conditions of warranty
▶ Comply with the expiry date of the sterilised items.
8 8 A A uxiliary equipment
Obtainable from dental and medical suppliers
Material summary
Instrument stand 2151
Cellulose pad 100 units
Cleanpac 10 units
Nozzle needle
Material summary
KaVo CLEANspray 2110 P
KaVo DRYspray 2117 P
KaVo Spray 2112 A
ROTAspray 2 2142 A
QUATTROcare plus Spray 2140 P 1.005.4525
9 9 T T erms and conditions of warranty
The following warranty conditions apply to this KaVo medical device:
KaVo provides the end customer with a warranty of proper function and
guarantees zero defects in respect of material and processing for a period
of 12 months from date of invoice, subject to the following conditions:
In case of justified complaints, KaVo will honour its warranty with a free
replacement or repair. Other claims of any nature whatsoever, in particular
with respect to compensation, are excluded. In the event of default, gross
negligence or intent, this shall only apply in the absence of mandatory legal
regulations to the contrary.
KaVo cannot be held liable for defects and their consequences that have
arisen or may arise from to natural wear, improper handling, cleaning or
maintenance, non-compliance with operating, maintenance or connection
instructions, calcination or corrosion, contaminated air or water supplies or
chemical or electrical factors deemed abnormal or impermissible in ac‐
cordance with KaVo's instructions for use or other manufacturer's instruc‐
tions.
No liability is assumed when defects or their consequences are derived
from manipulations or changes to the product by the customer or a third
party.
Service warranty claims will only be accepted if the product is submitted
along with proof of purchase in the form of a copy of the invoice/delivery
note. The dealer, purchase date, type and serial number must be clearly
visible on this document.
Mat. no.
0.411.9501
0.411.9862
0.411.9691
0.410.0921
Mat. no.
1.007.0579
1.007.0580
0.411.9640
0.411.7520
59
60
61
62