Mass Spectrometry Interfaces For Linear Columns And / Or Interfacing The Uv Detector With The Ms - Thermo Scientific UltiMate 3000 Standard Applications Manual


2 Application Setup
2.15.1 Mass Spectrometry Interfaces for Linear columns and / or interfacing
the UV detector with the MS.
Nanospray Flex Series Ion Sources
2.15.1.1
Page 80
The mass spectrometry interface connects the LC outlet to the mass
spectrometer inlet. It is here that the column effluent is ionized and
introduced into the mass spectrometer. The type of interface required is
dictated by the application flow rate and type of MS instrument. The
common interfaces applicable to linear columns and / or the VWD
3400RS UV detector available for Thermo Scientific mass spectrometers
are shown below. For details on the connections, also see
The MS interface for EASY-Spray is discussed in
Figure 41: Nanospray Flex Series ion sources
UltiMate 3000 RSLCnano Standard Applications Guide
Nanospray Flex™ Ion Source
P/N: ES071
Nano Flow: 20 -1000 nl/min*
*depending on spray needle
MS compatibility
TM
LTQ™ and Velos Series
Orbitrap™ Series
Exactive™ series
Legacy TSQ™ series (Quantum Access
Max, Vantage, Ultra etc.)
Nanospray Flex NG™ Ion Source
P/N: ES072
Nano Flow: 20 -1000 nl/min*
*depending on spray needle
MS compatibility
Orbitrap Fusion™ series
TSQ™ Quantis, Altis, Endura and Quantiva
section 2.1.4.
section 2.10.