Event Lighting PRO PAR PAR6X12OB User Manual page 8

IR remote control mode
-You must switch off wireless DMX function, select
-Select , then use IR remote to switch on IR remote control mode.
Key Function
Switch on/off IR function
Select auto colour switch mode (CC)
or auto colour pulse out mode (CP)
with different speed
Select sound active mode (SU) with
different sensitivity level
Select auto colour fade mode (dE)
with different speed
Select manual colour mode
www.event-lighting.com.au
.
Display
to
or
your last setting
between
to
to
7
Pressing <blackout> button to switch on
the fixture IR function, fixture will go to
CC12 auto colour switch mode or your
last setting
Pressing <blackout> button when unit
under IR mode, fixture will blackout and
on IR standby mode
Using <Auto> button to select CC or CP
mode, using to change
speed.
Pressing <SOUND> button to select SU
mode, using to change
sensitivity level
Pressing <FADE> button to select dE
mode, using to change
speed.
Pressing <MANUAL> button to entry
manual colour mode
Using
to cycle though 20% change of intensity
of each colour separately.
Pressing <MANUAL> button to quit
manual colour mode, fixture will blackout
button