Product Certifications - Emerson Rosemount 3051CF Series Quick Start Manual

October 2019
9

Product certifications

Rev 2.8
9.1 European directive information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com/Rosemount.
9.2 Ordinary location certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
9.3 North America
9.3.1 E5 USA Explosionproof (XP) and Dust-Ignitionproof (DIP)
E5
Ranges 1-5
(HART)
Certificate
Standards
Markings
Range 6
(HART/
Fieldbus/
PROFIBUS)
Certificate
Standards
Markings
Quick Start Guide
FM16US0121
FM Class 3600 - 2018, FM Class 3615 - 2018, FM Class
3616 - 2011; FM Class 3810 - 2005, ANSI/NEMA 250 -
2008
XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F, G; CL III;
T5 (–50 °C ≤ Ta ≤ +85 °C); Factory Sealed; Type 4X
1053834
ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30 -M1986,
CSA Std. C22.2 No.142-M1987, CSA Std. C22.2 No. 213 -
M1987
XP Class I, Division 1, Groups B, C, and D, T5, (–50 °C ≤ Ta
≤ +85 °C) Suitable for Class I, Zone 1, Group IIB+H2, T5;
DIP Class II and Class III, Division 1, Groups E, F, and G, T5,
(–50 °C ≤ Ta ≤ +85 °C); Type 4X; Factory Sealed; Single
Seal (See drawing 03031-1053)
Quick Start Guide
29