Emerson Rosemount 3051CF Series Quick Start Manual page 9

October 2019
2.3 Mount the transmitter in steam applications
Procedure
1. Place taps to the side of the line.
2. Mount beside or below the taps.
3. Fill impulse lines with water.
Figure 2-4: Mounting the Transmitter in Steam Applications
In-line
2.4 Install bolts
If the transmitter installation requires assembly of the process flanges,
manifolds, or flange adapters, follow the assembly guidelines to ensure a
tight seal for optimal performance characteristics of the transmitters.
Use only bolts supplied with the transmitter or sold by Emerson
parts. Figure 2-5
length required for proper transmitter assembly.
Quick Start Guide
illustrates common transmitter assemblies with the bolt
Quick Start Guide
™
as spare
9