Password Setting In P0000; Oriented Start-Up - WEG CFW-11M RB User Manual

5.2.1 Password Setting in P0000

5.2.2 Oriented Start-Up

There is a group of parameters named "Oriented Start-up" that makes the converter settings easier. Within
this group there is a parameter P0317, through which it is possible to enter in the Oriented Start-Up routine.
The Oriented Start-Up routine presents the main parameters on the HMI in a logical sequence, so that their
setting, according to the operation conditions, prepares the converter for the operation with the used line
and motor.
In order to enter into the Oriented Start-up routine, follow the steps presented in figure 5.2, first modifying
parameter P0317 to 1 and then, setting all remaining parameters as they are prompted in the display.
Step Action/Result
- Monitoring Mode.
1 - Press "Menu"
(rigth soft key).
- Group "00 ALL
PARAMETERS" is
2
already selected.
- Press "Select".
- Parameter "Access to
Parameters P0000: 0"
3
is already selected.
- Press "Select".
- To set the password, press
the Up Arrow until
4
number 5 is displayed in
the keypad.
- When number 5 is
5 displayed in the keypad,
press "Save".
- If the setting has been
properly performed, the
keypad should display
6 "Access to Parameters
P0000: 5".
- Press "Return"
(left soft key).
7 - Press "Return".
- The display returns to
8
the Monitoring Mode.
Figure 5.1 - Steps for allowing parameters modification via P0000
First Time Power-Up and Start-Up
Display Indication
Run RB + LOC 618 V
400 A
618 V
380 V
15:45 Menu
Run RB + LOC 618V
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Selec.
Run RB + LOC 618V
Access to Parameters
P0000: 0
Line Voltage
P0002: 380 V
Return 15:45 Selec.
Run RB + LOC 618V
P0000
Access to Parameters
0
Return 15:45 Save
Run RB + LOC 618V
P0000
Access to Parameters
5
Return 15:45 Save
Run RB + LOC 618V
Access to Parameters
P0000: 5
Line Voltage
P0002: 380V
Return 15:45 Selec.
Run RB + LOC 618V
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Selec.
Run RB + LOC 618V
400 A
618 V
380 V
15:45 Menu
5
CFW-11M RB |5-3