Mk8000 Stand-Alone Station: Installing The Ms Software - Siemens MK8000 MP4.30 Installation/Configuration Manual

Installation
3.4.2

MK8000 stand-alone station: installing the MS software

3.4.2.1 Installing the Microsoft .NET framework V1.1
22
Building Technologies
Fire Safety & Security Products
Fig. 5 MK8000 Software Setup page
The MK8000 Installation command, at the bottom of the page, becomes active
only if a valid combination of pre-requisites has been installed (see 3.1.1 at p. 10).
MK8000 software requires the support of the Microsoft .NET V1.1 framework li-
brary. As with other Microsoft libraries, this package is distributed free of charge
and can be easily installed selecting the corresponding option in the Pre-
requisites menu.
In the installation procedure started from the setup page (Fig. 5), you only have to
agree on the terms of the license agreement (Fig. 6), press Install, and then wait
for the software setup to complete (Fig. 7).
Fig. 6 Accepting the .NET Framework V1.1 License Agreement
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
06.2010