Siemens MK8000 MP4.30 Installation/Configuration Manual page 90

Tips for Integrating with an OPC client
90
Building Technologies
Fire Safety & Security Products
B Object property list List of properties of the currently selected object
C Simulation logging Logging of the simulated communication
The events from the SiPass Access Control system and from the CCTV Network
cannot be simulated with the standard Field Simulator.
Launching and using the System Supervisor Browser
The System Supervisor Browser can be launched either through the right click
menu of the System Monitor, or through the MK8000 program menu
(StartPrograms MK8000System Supervisor Browser).
In the left pane (Fig. 91-A), the MK8000 stations are listed. Selecting one of the
stations results in the corresponding processes showing in the right pane (Fig. 91-
B).
For each process, a small coloured box shows the current process status. The
System Supervisor Browser uses the same Green-Yellow-Red colour scheme
used in the System Monitor:
 Green
Everything is running properly.
 Yellow
The process is starting up.
 Red
There is an error at the level of the software.
In this case, try to stop and start the server again.
If the problem persists, contact technical support.
Fig. 91 System Supervisor Browser
A Stations
B Processes
Server and FEP stations running the MK8000
Processes running on the station selected in the left pane
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
06.2010