Mk8000 Technical Utilities - Siemens MK8000 MP4.30 Installation/Configuration Manual

3.4.5

MK8000 technical utilities

Building Technologies
Fire Safety & Security Products
 Composer User Manager – Allows adding and removing users enabled to
access Composer (any project) and defining their capability. Composer us-
ers must be defined in Windows.
 Refer to the Composer Technical Manual, document no.A6V10062401.
 Export wizard – allows for configuration export into *.CSV file.
 Inspector – logs OPC messages and activity for troubleshooting.
 MK8000 test client – tests the server configuration and connection with the
subsystems.
The following utilities are also installed along with MK8000 software, although they
are not directly available on the programs menu.
The folder:
<installation folder>\Utilities\
contains various sub-folders with utility programs. Some of them can be used by
you for specific purposes and are documented here.
We recommend using these applications carefully. Also, do not start any utility
program not included in the list below or documented in other sections of this
documents.
Windows XP SP2,SP3/Vista Firewall Configuration
The script MM8000 Firewall Cnf.vbs, provided in the folder:
<installation folder>\Utilities\Firewall Configuration
can configure the Windows XP SP2,SP3 / Vista firewall to allow MK8000 software
to communicate across the network. The script can be used on any type of
MK8000 stations (stand-alone, client, FEP).
Line monitor
The Line Monitor utility can connect to the MM8000 communication drivers and
trace the messages on the screen or disk. See the on-line manual for more infor-
mation (select Help  On-line Manual in the Line Monitor program Menu).
NW8202
This program allows setting the IP address in the NK822x units. Refer to the
NK8000 Installation, Configuration, and Commissioning Manual (document
no.A6V10062437).
Sintony Uploader
This utility software can acquire the structure and text data from the Sintony intru-
sion control units over the serial line. Refer to DMS8000 Network, Fire, and Intru-
sion Connectivity Guide (document no.A6V10062425).
SiPass Export Tool
This tool can acquire the configuration data from the SiPass system over an IP
network connection. Note that this program is also available in a dedicated folder of
the DMS8000 CD and can be used without installing the entire package. See also
the Access Control Connectivity Guide (document no.A6V10062451).
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
Installation
41
06.2010