Selecting The Type Of Windows Security; Enabling The Automatic Start-Up - Siemens MK8000 MP4.30 Installation/Configuration Manual

Installation
3.2.2

Selecting the type of Windows security

3.2.3

Enabling the automatic start-up

18
Building Technologies
Fire Safety & Security Products
The MK8000 installation procedure needs to define a new 'internal' Windows user
(DMS8000_PROC, default password = 'Dixie#65A39!PWD') and assign it to the
administration user group. This is required for handling the internal inter-process
communication.
Note that the DMS8000_PROC user must be defined (and maintained) on all the
PCs involved in the OPC communication, both server and client(s).
Note: Do not remove this user.
During the installation, the MK8000 user can be defined in two different ways:
 Standard security: the internal user is automatically created with the name
DMS8000_PROC.
 Advanced security: the internal username and password can be specified as
desired. You can specify a new user account or an existing one.
During the installation procedure of MK8000 software, you are asked to specify
whether the user security is handled in Standard or Advanced mode.
In both cases, the internal user information can be changed later using the Engi-
neering Tools (see 3.4.5.1 at p. 42).
During setup, you will be also prompted to choose whether to enable the automatic
start of the MK8000 server at start-up. Unless you need to perform testing or trou-
bleshooting, it is usually best to enable auto-start. If you need to change this set-
ting for any reason, please refer to Appendix B, p.91.
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
06.2010