Building Technologies
Fire Safety & Security Products
Fig. 79
Selecting the server component for detailed DCOM configuration
General tab – MM8000Server Properties
We recommend leaving the Authentication level on Default. This means that
the server will use this method of determining who will be allowed access that
was set up on the Default Properties tab in the DCOM Config utility.
The General tab should look like Fig. 80:
Fig. 80
MM8000Server Properties - General tab
Tips for Integrating with an OPC client
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
81
06.2010