Siemens MK8000 MP4.30 Installation/Configuration Manual page 49

Building Technologies
Fire Safety & Security Products
Fig. 43 Setting station parameters
Computer name
Be aware that, while the Description field can be freely defined to describe the
station, the Name field must correspond to the network name of each PC: right
click on My Computer on the Desktop, and then select Properties and Computer
Name (Fig. 44).
Note that, in case the Full computer name includes more levels separated by
dots, you should consider only the first of them, e.g. PCar4.it001 becomes PCar4
for the MK8000 Station name.
Fig. 44 Finding out the computer name
Note: In MK8000 system  Physical Configuration  Stand-Alone, the Sta-
tion Name (localhost) and IP address (127.0.0.1) fields are already set for this
configuration (Fig. 45). Do not change this setting.
Fig. 45 Setting station name and address - Stand-Alone
Configuring the MK8000
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
49
06.2010