4.11.1 Verifying The Mk8000 License - Siemens MK8000 MP4.30 Installation/Configuration Manual

Configuring the MK8000

4.11.1 Verifying the MK8000 license

64
Building Technologies
Fire Safety & Security Products
Each MK8000 license supports a limited number of data points (according to what
was purchased). Specifically, the limitation applies to the total number of control
units and devices configured in Composer.
Note that the licensing mechanism has been changed in MP3.18. Previously, the
limitation was related to the number of OPC items dynamically connected.
As for the MM8000 license, the MK8000 OPC server license calculation is now
based on the static information of the Composer project. More precisely, the li-
cense parameters are the:
physical subsystems configured
–
physical objects configured for each subsystems
–
network drivers configured and connected to subsystems
–
The Composer tool can provide in any moment the required license parameters
and check them against the values currently set.
As shown in Fig. 65, select the MK8000 node and then the View License Data
button in the Node tab.
At this point, the required license values for the Composer configuration appear.
Clicking Check License Data results in the values being compared to the PAK
codes. If the license is correct, the text Available show in the Available license
column.
Before checking the license, be sure that the MK8000 server is running. You can
start and verify the status of the server tasks with the System Monitor icon
the bottom right corner of your screen.
 For more information, see Appendix A at p. 87.
Fig. 65 Viewing and checking the MK8000 license
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
in
06.2010