Enabling & Disabling Mk8000 Auto-Start - Siemens MK8000 MP4.30 Installation/Configuration Manual

Opc server for subsystems

Hide thumbs Also See for MK8000 MP4.30:

Table of Contents

Appendix B.

Building Technologies

Fire Safety & Security Products

Enabling & disabling MK8000 auto-start

During normal use of the MK8000, it is convenient to have the MK8000 server start

automatically upon system start-up. During troubleshooting and system testing,

however, it may be more convenient to disable auto start.

Changing the auto start settings

To change the auto start settings, do the following:

1. Open the services menu (Start  Settings  Control Panel  Administrative

Tools  Services).

2. Select DixieSystem Supervisor.

3. Right-click DixieSystem Supervisor to display the Properties pop-up window.

4. Select one of the options available in the Startup type drop-down menu in the

General tab.

Fig. 92

Change auto-start settings for the MK8000 server

Tips for Integrating with an OPC client

048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en

06.2010

Table of Contents