Siemens MK8000 MP4.30 Installation/Configuration Manual page 47

Building Technologies
Fire Safety & Security Products
CONFIGURING MK8000
The following steps outline what you need to do to configure MK8000:

Set up the Composer project
Create a new project
Define the general structure of the project tree, taking into account the goal of
presenting a structure to the final user that is clear and familiar to him/her (Net-
work – Subsystems)

Create the MK8000 project and system architecture

Configure the communication network

Add and configure the subsystems, following the planned structure in the SPECS

Link the subsystems to the communication network

Add the required Communication Drivers

Connect the MK8000 with the network and FEP stations

Adjust network settings (baud rate, ports, etc)

Set vitality (mandatory if connecting CS11 without MK7022)

Set OPC group names (subsystems)

Set up the Multi-state value data format

Set up the diagnostic log

Transfer the Configuration to the MK8000

Test the configuration

Backup your Project

Generate an OPC configuration export file

Set the MK8000 server to automatically start, if necessary
Configuring the MK8000
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
DMS-CG
DMS-CG
p. 48
DMS-CG
DMS-CG
DMS-CG
p. 50
p. 53
p. 58
p. 59
p. 60
p. 60
p. 62
p. 63
p. 65
DMS-CG
p. 70
p. 91
47
06.2010