What Has Been Changed In Mp 4.30; Documentation Changes And Corrections In This Edition - Siemens MK8000 MP4.30 Installation/Configuration Manual

10 Configuration is loaded onto the station(s), and tested
11 3rd party integration team connects OPC client to MK8000
Once the client is connected, the 3
be able to continue without further DU support
12 System is 'acceptance tested'
This is typically done with both the DU and the 3rd party integra-
tion team working through any problems together.
13 Project is handed over to the customer
Once the system is running according to plan, the customer ac-
cepts the system and the project is closed.
14 Maintenance contract begins
If the customer purchased a maintenance contract, the DU begins
performing routine maintenance and troubleshooting procedures.
2.1

What has been changed in MP 4.30

2.1.1

Documentation changes and corrections in this edition

Building Technologies
Fire Safety & Security Products
rd
party integration team should
This section illustrates the new features of MK8000 MP4.30 in comparison with
previous MP4.20.
Section, Page Improvements
3.1.1, p.10 Requirements aligned with MM8000.
Faster CPU and larger RAM memory recommended for large
configuration
The following is the list of corrections and improvements (not related to new soft-
ware features) included in this edition of the document.
Section, Page Modifications
1.4, p.7 Recommendations about "Data Privacy and Protection"
3.1.3, p.14 Requirements for Secure Operations
Commissioning, p. 65
Commissioning, p. 65
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
Introduction
9
06.2010