Icu Utility; Configuring The Disk Array Controller; Configuring The Standard Scsi Controller; Installing The Operating System - Siemens PRIMERGY 560 Operating Manual

Intel-based server

Table of Contents

Preparation for use and operation

ICU Utility

You can configure plug&play boards and standard ISA boards with the utility ICU

(ISA Configuration Utility). You can also use ICU to check the system resources of

the server (e.g. interrupt assignment). Operating instructions for the ICU program

are provided in the corresponding manual.

If your server is fitted with a Disk Array Controller (DAC), you must configure the

DAC as described in the related documentation.

If your server is equipped with an Ultra SCSI controller or a Fast-Wide SCSI-2

controller, you must make the relevant settings in the configuration of the controller

for the drives used.

Insert the installation disk and the CD of the operating system you want to

install.

Reboot the server.

Follow the instructions on the screen and in the manual for the operating

system.

If your system is fitted with a DAC, please refer to the User's Manual for the DAC

for how to install the desired operating system.

Configuring the server

A26361-K412-Z107-3-7619

Table of Contents