Siemens MK8000 MP4.30 Installation/Configuration Manual page 88

Tips for Integrating with an OPC client
88
Building Technologies
Fire Safety & Security Products
 Close: remove the System Monitor icon from the system tray.
Note that the icon application can be easily started again from the Windows
Start menu ('Start  Programs  DMS8000  DMS8000 System Monitor').
Fig. 87 System Monitor right-click menu: Server is running, therefore the 'Stop'
command is available
Fig. 88 DMS8000 information window (note that the version displayed in this pic-
ture may not match the official product release)
Advanced menu
The Advanced menu includes
 Start Server in Simulation Mode: start the system with an additional applica-
tion that allows simulating field events (see below).
 Simulation Settings: this command permits to set the name of the simulation
PC: in most cases, the default option (localhost) is exactly what you need.
 Show Advanced Information: checking this option allows getting more de-
tailed information in the status messages (Fig. 89).
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
06.2010