Control Units And Network Components; Mk8000 Communication Drivers - Siemens MK8000 MP4.30 Installation/Configuration Manual

Configuring the MK8000
4.3

Control units and network components

4.4

MK8000 Communication drivers

50
Building Technologies
Fire Safety & Security Products
After MK8000 has been installed, any change in the computer name of the
stations requires a special procedure. Refer to the Engineering Tools de-
scribed in 3.4.5.1, p.42.
At this point, in your Composer project, you can add the control units and network
components.
This part is not discussed in this manual. Please refer to the following documents:
 Network and Subsystems Connectivity Guide (A6V10062425).
 SiPass Connectivity Guide (A6V10062451).
 Video Connectivity Guide (A6V10062457).
MK8000 network drivers
On the MK8000 Stand-Alone and FEP stations, you need to add the drivers that
provide the communication services for the OPC server. Several types of drivers
are available, and should be selected according to the actual connections to be
made with network devices and control units.
The drivers are organised in groups (channel or manager); the list includes:
 Serial channel (Channel), including:
 NS8010 Cerloop (ISO1745) Driver
used for connections to MK7022, CS11 (via CK11), FC700A (via FG700A).
 NS8011 BACnet Driver
used for connections to FS20, DESIGO PX and BACnet units in general.
 NS8012 CDI-Net Driver
used for connections to GWxx gateways.
 NS8210 NK8000 Driver
used for connections to NK82xx devices.
 NS8013 SPC Driver
used for connections to SPC control units.
 NS8014 SI410 Driver
used for connections to Sintony control units.
 NS8015 Fire CNDL Driver
used for connections to FC330A/CC1115 control units.
 Video Network Manager, including:
 TELSCAN Video Driver
used for connections to TELSCAN video web servers.
 SISTORE Video Driver
used for connections to SISTORE Video Digital Recorders.
 SiPass Driver
used for connecting to the SiPass Access Control application.
Note: for each station, you only need to include once each driver that is used, re-
gardless of the actual number of physical connections. Also, it is better not to add
drivers which are not used and would only make the project larger.
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
06.2010