Appendix A Chassis Views And Technical Specifications; Chassis Views; Hp 5930-32 Qsfp+/Hp 5930-32 Qsfp+ Taa - HP JG726A Installation Manual

Appendix A Chassis views and technical
specifications

Chassis views

HP 5930-32 QSFP+/HP 5930-32 QSFP+ TAA

Figure 50 Front panel
(1) QSFP+ port
(3) System status LED (SYS)
Figure 51 Rear panel
(1) Grounding screw (auxiliary grounding point 2)
(3) Serial console port
(5) Fan tray slot 2
(7) Power supply slot 2
(9) USB mini console port
(11) ACT LED for the management Ethernet port
The HP 5930-32 QSFP+/HP 5930-32 QSFP+ TAA switch comes with the two power supply slots empty
and a filler panel as an accessory. You can install one or two power supplies for the switch as needed.
In Figure 51, two 650W AC power supplies are installed in the power supply slots. For more information
about installing and removing power supplies, see
The HP 5930-32 QSFP+/HP 5930-32 QSFP+ TAA switch comes with the two fan tray slots empty. You
must install two fan trays of the same model for the switch. In
are installed in the fan tray slots. For more information about installing and removing fan trays, see
"Installing/removing a fan tray."
45
(2) QSFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power supply slot 1
(8) USB port
(10) LINK LED for the management Ethernet port
"Installing/removing a power
Figure 51, two LSWM1HFANSC fan trays
supply."