Section 3.0 Dollies; Installations Within The United States; Zero Clearance Dollies; Tilting Table Dollies - GE BrightSpeed Elite Preinstallation Manual

GE H
EALTHCARE
D 5141177-100, R
IRECTION EVISION
Section 3.0
Dollies
3.1

Installations within the United States

Typically, domestic shipments (shipments within the United States) involve the use of dollies for
moving the gantry, table, and console. After completing installation, return the dollies to GE using
the shipping document found in Box #1.
3.2

Zero Clearance Dollies

Deliveries involving small elevators with a depth of at least 2692 mm (106 in.) require zero
clearance dollies. Zero clearance dollies allow movement of the gantry in tight areas. Avoid using
them for normal dock or van deliveries. To order zero clearance dollies, go to
dollyshop.com.
3.3

Tilting Table Dollies

Deliveries involving small elevators with a depth of at least 2438 mm (96 in.) require tilting table
dollies. If storing the system prior to installation, do not order tilt dollies. If you are unable to obtain
tilt dollies for delivery, substitute riggers in their place. A limited number of tilt dollies exist for U.S.
deliveries. To order tilt dollies, go to http://www.umi-dollyshop.com.
3.4

Installation Outside of the United States

Customers may purchase dollies (B7850LD) for shipments outside of the United States. After
removing the system from the crates, DO NOT return dollies shipped outside of the US to GE
Healthcare in Milwaukee, WI, USA. Instead, forward them to the local GE office or warehouse.Zero
Clearance and Tilting Table dollies can be purchased through UMI, To buy tilt dollies, go to:
/www.umi-dollyshop.com.
Page 118
14
Section 3.0 - Dollies
B S E , E , E
RIGHT PEED LITE DGE XCEL
http://www.umi-

: P -I
RE NSTALLATION
http:/