Replacing The 2.5" Backplane Board; Removing The 2.5" Backplane Board - Intel H2000G Series Service Manual

Replacing the 2.5" Backplane Board

Removing the 2.5" Backplane Board

1. Remove all hot-swap drive carriers, regardless of whether a drive is
installed in the carrier.
2. Remove the power distribution module cover. For instructions, see
Removing the Power Distribution Module
3. Disconnect all cables from the backplane board.
4. Remove the drive cage screws (see letters A and B) and pull out the drive
cage (see letter C).
B
A
Figure 36. Removing the Drive Cage
Cover.
C
AF006465
24