Installing The Power Distribution Module Cover - Intel H2000G Series Service Manual
Server chassis
Hide thumbs
Also See for H2000G Series:
- Configuration manual (32 pages) ,
- Configuration manual (34 pages) ,
- Service manual (44 pages)
Table of Contents
Advertisement
Installing the Power Distribution Module Cover
1. Place the cover onto the chassis and slide forward until the front edge of
the cover is pressed up against the back edge of the front drive bay (see
letter A).
2. Rotate the front end of the cover down to position and fix the cover with
the screw (see letter B).
15
B
Figure 20. Installing the Power Distribution Module Cover
A
AF006424
Advertisement
Table of Contents
