EMC Connectrix EC-1100 System User Manual page 62

Connectrix Manager Administration
2
Connectrix EC-1100 System User Guide
2-30
c. Network Address Restrictions — Use this area to either allow
access from any workstation or all access from workstations
with specific network addresses.
• Click Allow any network address to allow access from any
remote workstation that is configured to access the
Connectrix service processor.
• Click Specify remote network address to allow access only
from specific workstations.
• Click New and enter an address for a new workstation.
To modify an existing address, select the address and click
Modify. When the Modify Network Address dialog box
appears, click in the Network Address field, then delete and
enter characters as required.
To delete an address, select the address in the Network
Address Restrictions area, then click Delete.
3. Click Activate at the bottom of the dialog box to confirm changes
made on the Sessions Options dialog box and to close the box.