EMC Connectrix EC-1100 System User Manual page 131

Creating a zone set
Modifying a zone set
Modifying SNMP options
• Parameter — The parameter affected by the event. For example, if
a product is added or deleted, the product's network address
appears as shown in Figure 5-1.
Note that the type of network address that displays—such as
network IP address or host name—is determined on a
product-by-product basis according to how the product is
identified in the Connectrix Manager New Product dialog box.
• Source — The workstation from which the user performed the
logged action. If the change was made locally from the
Connectrix service processor, the service processor address
displays.
Buttons at the bottom of the dialog box enable the following actions:
• Export — Writes the log to a text file that can be viewed, edited,
or printed using an editor or desktop word processing tool. For
more information, refer to Exporting Log Files on page 5-10.
• Clear — Clears all entries in the log.
• Refresh — Rereads the current data and refresh the screen with
the new display.
• Close — Closes the Audit Log and returns to the Connectrix
Manager window.
Connectrix Manager Logs
Audit Log
5-3
5