EMC Connectrix EC-1100 System User Manual page 117

6. Perform one of the following steps:
• Click All Zone Sets to remove the zone from all configured
zone sets.
• Click the radio button for the selected zone set to remove the
zone from that zone set only.
7. Click the OK button to remove the zone(s).
Find WWNs
Use this option to find zones where a specific WWN is located. Once
located, you can remove the WWN from one or more zones in the
Zone Library.
1. If a Nickname has been defined for the WWN, begin this
procedure by deleting the Nickname.
2. In either the Zoning View or the Topology View, move your
cursor over the Configure icon and click Zone Sets on the pop-up
menu.
This displays the Zone Sets dialog box.
3. Click the magnifying glass icon next to a zone set to expand the
list of zones in the set. Click the magnifying glass icon next to a
zone to expand the list of members (ports and device WWNs) in
the zone.
4. Select the WWN that you want to search for.
5. Move the cursor over the Actions icon and click Find World
Wide Name on the pop-up menu.
The Find WWN dialog box appears with the WWN that you
selected in the World Wide Name field at the top of the dialog
box. The zone sets and zones where this WWN is located is
displayed in the Zone Set and Zone columns in the lower part of
the dialog box.
Configuring and Managing Zoning
Fabric Zoning
4
4-25