EMC Connectrix EC-1100 System User Manual page 144

Connectrix Manager Software Messages
A
Message:
Description:
Action:
Message:
Description:
Action:
Message:
Description:
Action:
Message:
Description:
Action:
Message:
Description:
Action:
Connectrix EC-1100 System User Guide
A-4
Cannot modify product.
The user cannot modify the selected product.
Verify that the link to the product is up.
If the link is up, then the Connectrix service processor may be busy.
The product may be open on another Connectrix client.
This user may not have permission to modify this product.
Click OK to remove all contents from log.
The selected action will remove all contents from the selected log.
Click OK to remove, or Cancel to cancel the remove.
Connection to Connectrix service processor lost. Click OK to
exit application.
The Connectrix Manager lost the network connection to the Connectrix
service processor.
Re-start the Connectrix Manager to connect to the Connectrix service
processor.
Connectrix Manager error "n"
Connectrix Manager encountered an internal error and cannot continue.
(This error should never occur under normal operation.)
Contact support personnel and report the problem.
Connectrix service processor is shutting down. Connection
will be terminated.
The Connectrix service has been shut down on the Connectrix service
processor.
Exit the Connectrix Manager and reboot the computer.