EMC Connectrix EC-1100 System User Manual page 181

Power
Input power
Requirements
User-supplied
Power Outlets (2)
Input Power Cords
(2) from EC-1100
Auto-call Modem
Input Power
User-supplied
Modem Power
Connector
Operating Temperature
Environment
Relative Humidity
Maximum
Wet-bulb
Temperature
Maximum Altitude
Service Clearance
CAUTION
!
Although the above service clearances are necessary only when the
unit is being serviced, you should always provide at least 6 inches
(15.25 cm) of clearance in the front and 6 inches in the rear for air
flow.
Two 20-Amp dedicated circuits, 208 to 264 VAC,
47 to 63 Hz
Domestic: Russelstoll 3913 (flex) or 3743 (rigid)
International: Country-specific
Domestic: Russelstoll 3270
International: Country-specific
Domestic: 110 VAC, 15 Amps
International: Country-specific
Domestic: NEMA 5-15R
International: Country-specific
40° F to 104° F (4.5° C to 40° C)
8% to 80% (non-condensing)
80.6° F (27° C)
10,000 ft (3,047 m)
Front: 36 inches (91.5 cm)
Rear: 36 inches (91.5 cm)
Sides: None necessary
Specifications
D
EC-1100
D-3