Preface
Related
Documentation
xvi
•
Chapter 5, Connectrix Manager Logs, includes information on
using the Connectrix Manager's audit, event, session, and
product status logs.
•
Appendix A, Connectrix Manager Software Messages, lists error
messages, with their explanations, that are generated by the
Connectrix Manager.
•
Appendix B, Setting the ED-1032 Network Addresses, explains how
to change network addresses on the ED-1032.
•
Appendix C, Remote Workstation Installation, explains how to load
the Connectrix Manager software onto a remote workstation
running the Windows (95/98/NT/2000), Solaris, or HP-UX
operating system.
•
Appendix D, Specifications, lists physical and environmental
specifications.
•
Appendix E, Upgrading to a Single Service Processor Environment,
explains how to upgrade the server/service processor
environment to allow multiswitch support from a single
Connectrix service processor.
•
Appendix F, Power-on and Power-off Procedures, explains the
proper procedures for powering on and powering off the
Connectrix cabinet and its components.
•
The Glossary defines terms, abbreviations, and acronyms used in
this manual.
Other EMC publications that provide additional information about
Connectrix and Symmetrix Fibre Channel are:
•
Connectrix EC-1100 System Planning Guide, P/N 300-600-002
•
Connectrix ED-1032 Director User Guide, P/N 300-600-004
•
Connectrix Enterprise Storage Network System Topology Guide, P/N
300-600-008
•
Symmetrix Fibre Channel Product Guide, P/N 200-999-642
Connectrix EC-1100 System User Guide