EMC Connectrix EC-1100 System User Manual page 157

2. Press Clear to activate the cursor over the right-most octet.
3. Press Detail to increment to the desired value. To increment digits
rapidly, hold down the button for more than a second.
4. Press Entry to enter the new value.
5. Press Clear to move one field to the left.
6. Repeat steps 3 through 5 for all fields to be changed. (Repeating
step 5 is not necessary after changing the left-most field; pressing
Entry after changing that field saves the new IP address.)
7. Record the IP address. It is required to define the ED-1032 to the
Connectrix Manager software.
Setting the ED-1032 Network Addresses
IP Address
B
B-3